Here are a couple screenshots of the model made. These are all 1/8" parts, meant to be cut out on the laser cutter. The plan is for them to interlock together, and possibly glue if needed. There is a tab on the middle piece intended to fit into a groove on the side part. 

The original idea was to mount the servo beneath the middle plate, and is like that on the cardboard prototype. But, due to a lack of acrylic, we had to make the final design smaller. This meant the servo won't fit. Instead, it will be mounted on the side, and on top of everything. The board will mount on the side opposite to it, making it a complete unit.